Adjusting The Brightness Of The Monitor - Olympus SH-25MR Instruction Manual

Hide thumbs Also See for SH-25MR:

Specification (4 pages)

Basic manual (76 pages)

Table Of Contents

Table of Contents

Adjusting the image processing

function [Pixel Mapping]

x (Settings Menu 2)

This function has already been adjusted at factory

shipping, and no adjustment is needed right

after purchase. Approximately once a year is

recommended.

For best results, wait at least one minute after taking

or viewing pictures before performing pixel mapping.

If the camera is turned off during pixel mapping, be

sure to perform it again.

To adjust the image processing function

Press the A button when [Start] (Submenu 2) is

displayed.

●

The check and adjustment of the image processing

function starts.

Playing back images on a TV [TV Out]

x (Settings Menu 2)

The TV video signal system varies depending on the countries and regions. Before viewing camera images on your

TV, select the video output according to your TV's video signal type.

Submenu 2

NTSC

NTSC/PAL

PAL

480p/576p, 720p,

HDMI Out

1080i

Off

HDMI Control

The factory default settings differ according to the region where the camera is sold.

For information on using the menus, see "Setup menu" (p. 8).

Pixel Mapping

TV Out

Submenu 3

Connecting the camera to a TV in North America, Taiwan, Korea, Japan,

and so on.

Connecting the camera to a TV in European countries, China, and so on.

Set the signal format to be given priority. If the TV setting does not match,

it is changed automatically.

Operate with the camera.

Operate with the TV remote control.