Power On - Olympus E-PL3 Instruction Manual

Power on

1
Press the ON/OFF button to turn on the camera.
• When the camera is turned on, the (blue) power lamp will light and the monitor will
turn on.
• When the camera is turned on, dust reduction will be performed to remove dust from
the surface of the image sensor fi lter.
To turn off the power, press the ON/OFF button again.
•
2
Set the mode dial to A.
■ Monitor
ISO-A
200
250 F5.6 250
Using the Monitor
You can adjust the angle of the monitor.
8 EN
■ Mode dial
■ ON/OFF button
Battery level
7 (green): Camera ready to shoot.
8 (green): Low battery
9 (blinks red): Charge the battery
L N
HD
Available recording time
01:02:03 01:02:03
38 38
Number of storable still pictures
1
Displayed for about 10 seconds
after the camera is turned on.
2