Image Overlay; Audio Recording - Olympus E-PL3 Instruction Manual

Image overlay

Up to 3 frames of RAW images taken with the camera can be overlaid and saved as a
separate image. The image is saved with the record mode set at the time the image is
saved. (If [RAW] is selected, the copy will be saved in [YN+RAW] format.)
1
With a RAW image displayed during playback, press Q and select
[Image Overlay].
2
Select the number of images in the overlay and press Q.
3
Use FGHI to select the RAW images that
will be used in the overlay and press Q to
select.
• When you have selected the number of images
specifi ed in Step 2, the overlay will be displayed.
4
5
Adjust gain.
Use HI to select an image and use FG to adjust
•
gain.
• Gain can be adjusted in the range 0.1 – 2.0. Check the
results in the monitor.
5
Press Q. A confi rmation dialog will be displayed; select [Yes] and press
Q.
%
Tips
• To overlay 4 or more frames, save the overlay image as a RAW fi le and use
[Image Overlay] repeatedly.

Audio recording

Add an audio recording (up to 30 sec. long) to the current photograph.
1
Display the image to which you want to add an
audio recording and press Q.
• Audio recording is not available with protected images.
• Audio recording is also available in the playback menu.
2
Select [R] and press Q.
• To exit without adding a recording, select [No].
3
Select [R Start] and press Q to begin
recording.
To stop recording part-way through, press Q.
•
4
Press Q to end recording.
• Images with audio recordings are indicated by a H
icon.
• To delete a recording, select [Erase] in Step 2.
68 EN
Image Overlay
RAW RAW RAW
RAW
RAW RAW RAW
Back
Image Overlay
×0.3 ×1.5 ×1.5 ×0.5
Back
JPEG
JPEG Edit
R
Rotate
m
<
Back
R
No
R
Start
Erase
Back
Set
Set
Set
Set