Positioning your projector
Using the quick install
The projector provides a hot key to set Projector Installation, Test
Pattern, and Keystone quickly.
Press Quick Install on the remote control and press ▲/▼ to select:
•
Projector Installation: See
•
Test Pattern: See
•
Keystone: See
1. Choosing a location
Your projector is designed to be installed in one of four possible installation locations:
Front Wall
2. Use the test pattern
3. Correct the image
2D Keystone correction
Corner fit correction
16
Positioning your projector
QUICK INSTALL
Projector Installation
Test Pattern
Keystone
"Positioning your projector" on page
"Using the test pattern" on page
"Correcting 2D Keystone" on page
Rear Table
MENU Exit
16.
46.
27.
Front Table
Rear Wall