Setting The Presentation Timer - BenQ MX854UST User Manual

8. Make sure you have made all of the desired adjustments.
9. Press MENU/EXIT to exit and save the settings.
Resetting current or all picture modes
1. Go to the Picture menu and highlight Reset Picture Settings.
2. Press MODE/ENTER and press ◄/► to select Current or All.
• Current: returns current picture mode to the factory preset settings.
• All: returns all settings, except User 1/User 2 in the Picture menu to the
factory preset settings.

Setting the presentation timer

Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1. Go to the System Setup: Basic > Presentation Timer menu and press MODE/
ENTER to display the Presentation Timer page.
2. Highlight Timer Period and decide the time period by pressing ◄/►. The length of
time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in
5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press ▼ to highlight Timer Display and choose if you want the timer to show up
on the screen by pressing ◄/►.
Selection
Always
3 min/2 min/1 min
Never
4. Press ▼ to highlight Timer Position and set the timer position by pressing ◄/►.
5. Press ▼ to highlight Timer Counting Direction and select your desired counting
direction by pressing ◄/►.
Selection
Count Up
Count Down
6. Press ▼ to highlight Sound Reminder and decide if you want to activate sound
reminder by pressing ◄/►. If you select On, a double beep sound will be heard at
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press ▼ and press ◄/► to highlight On and
press MODE/ENTER.
8. A confirmation message appears. Highlight Yes and press MODE/ENTER on the
projector or remote control to confirm. You will see the message "Timer is On"
appearing on the screen. The timer starts counting when the timer is on.
If Presentation Timer is activate, then "On" will change to "Reset".
Operation
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 3/2/1 minute(s).
Hides the timer throughout the presentation time.
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
41