Right Handlebar Removal/Installation - Honda VTR1000F Service Manual

FRONT WHEEL/SUSPENSION/STEERING
HANDLEBAR
RIGHT HANDLEBAR
REMOVAL
Hold the handlebar weight and remove the mount-
ing screw and the weight.
Disconnect the front brake light switch connectors.
Remove the two bolts, holder and the front brake
master cylinder assembly.
Remove the two screws and upper throttle housing.
Remove the two screws and right handlebar switch.
Loosen the handlebar pinch bolt, and remove the
stopper ring and handlebar from the fork.
Remove the throttle grip pipe from the handlebar.
INSTALLATION
Apply grease to the throttle grip pipe flange and in-
stall the throttle grip pipe onto the handlebar.
13-3