Shift Fork/Shift Drum Removal; Shift Fork/Shift Drum Inspection - Honda VTR1000F Service Manual

CLUTCH/GEARSHIFT LINKAGE
'"'" Remove the dowel pins and oil orifices.
Clean any sealant from the crankcase mating sur-
faces.
SHIFT FORK/SHIFT DRUM
REMOVAL
11-4
Separate the crankcase halves (page 11-3).
Remove the shift fork shaft set plate, shift fork shaft
and shift forks.
Remove the shift drum bearing set plate and shift
drum.
INSPECTION
Check the shift fork guide pins for abnormal wear
or damage.
Measure the shift fork I. O.
SERVICE LIMIT: 12.03 mm (0.474 in)
Measure the shift fork claw thickness.
SERVICE LIMIT: 5.9 mm (0.23 in)
Measure the shift fork shaft 0.0.
SERVICE LIMIT: 11.95 mm (0.470 in)
Revised: December 1999, '98-2000 VTR1000F
©1999 American Honda Motor Co., Inc· All Rights Reserved
MSV 8712 (9911)