Using The Intelligent Charging Function - Tecsun PL-365 Operation Manual

TECSUN RADIOS AUSTRALIA

USING THE INTELLIGENT CHARGING FUNCTION

In power off mode, install 3 x UM3 (AA size) rechargeable
(Ni-MH) batteries. Press & hold the [
" " and the "Ni-MH Battery" symbol appear on the
display.
1. Use any 5V external adaptor with USB plug to connect
this radio, the symbol "
to top during power charging. It stops when batteries are
fully charged.
2. You can also use any USB cable
to connect the radio with your PC
for charging.
Connect USB 5V to external
power sources
Notes for charging power:
Do not mix new and used batteries, or batteries of different
charging capacity.
Caution: Do not attempt to charge non-rechargeable
batteries, this will damage both the device and the batteries.
24/9 Powells Road, Brookvale, NSW 2100 Australia
Email: info@tecsunradios.com.au
] button until
" will advance from the bottom
17
Ph: +61 2 9939 4377
Ph: +61 2 9939 4377
www.tecsunradios.com.au
www.tecsunradios.com.au
Ph: +61 2 9939 4377
www.tecsunradios.com.au