Olevia LT26HVE Series User Manual page 21

Connecting to a Satellite Receiver or Cable Box With Component
Connectors
Disconnect all power sources before making any connections.
Use this hookup if your Satellite Receiver or Cable Box has component
(Y, Pb, Pr) jacks.
1.Using a component video cable, connect the Satellite Receiver or
Cable Boxes' Y , Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.
Colors on Component Video connectors:
Y: Green
Pb (also identified as Cb, CB or B-Y): Blue
Pr (also identified as Cr, CR or R-Y): Red
Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are
sometimes labelled as Y, Cb and Cr, or B-Y and R-Y. If so, connect the
cables to the matching colors.
2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes'
Audio OUT jacks to the TV's Audio in jacks.
Rear of TV
VIDEO-1 Audio Output
VIDEO L R
S-VIDEO ANT
VIDEO-2
EarPhone
L R
S-VIDEO VIDEO L R
Note: Use this method of connection if your Satellite Receiver or Cable
Box has component (Y, Pb, Pr) jacks.
Note: The YPbPr connection provides the best quality of video signal
compared to AV (composite) and S-Video connection.
TV Installation and Connection Guide
Component1
Y Pb / Cb Pr / Cr L R
Component2
Y Pb / Cb Pr / Cr L R
Component cable with RCA connector
Satellite Receiver or Cable Box
Audio cable
19