Olevia LT26HVE Series User Manual page 20

Connecting to a Satellite Receiver or Cable Box with A/V Connectors
Disconnect all power sources before making any connections.
1.Using Audio and S Video cables, connect the satellite receiver's Audio
and S Video OUT jacks to the TV Audio and S Video IN jacks.
2.Connect a 75-ohm coaxial cable from your cable or antenna to the TV
Ant (Antenna) jack.
75-ohm coaxial cable
Rear of TV
VIDEO-1
VIDEO L R
S-VIDEO
VIDEO-2
EarPhone
VIDEO L R
S-VIDEO
Note: S-Video is strongly recommended for use if your VCR or video
equipment has it because S-Video input has better quality of picture than
a composite Video signal.
Note: You can also use the Video 2 jacks located on the TV rear to connect
additional video equipment.
Component1
Audio Output
Y Pb / Cb Pr / Cr L
ANT
Component2
L R Y Pb / Cb Pr / Cr L
A/V cable with RCA connector
S Video cable
TV Installation and Connection Guide
Satellite Receiver or Cable Box
R
R
18