Olevia LT26HVE Series User Manual page 16

Connecting to a VCR
Disconnect all power sources before making any connections.
Use this hookup if you subscribe to a cable TV system that does not
require a cable box.
1.Using A/V cable and S-Video cables, connect the VCR's Audio and S Video
OUT jacks to the TV's Audio and S-Video In jacks.
Rear of TV
VIDEO-1 Audio Output
S-VIDEO VIDEO L R
ANT
VIDEO-2
EarPhone
S-VIDEO VIDEO L R
Connecting both Video IN or S-Video IN
Note: Use this method of connection if you subscribe to a cable TV
system that does not require a cable box.
S-Video is strongly recommended for use if your VCR or video
equipment has it. S-Video input has a better quality of picture than a
composite Video signal.
Note: You can also use the Video 2 jacks located on the TV rear to
connect additional video equipment.
Component1
Y Pb / Cb Pr / Cr L R
Component2
L R Y Pb / Cb Pr / Cr L R
A/V cable with RCA connector
S Video cable
TV Installation and Connection Guide
VCR
14