Olevia LT26HVE Series User Manual page 18

Connecting to a DVD Player with A/V or S-Video Cables
Disconnect all power sources before making any connections.
Note: Use this method of connection if your DVD player does not have
component (Y, Pb,Pr) jacks.
Note: If your DVD player has component video output connectors, for
best picture quality, use the connection described for Connecting to a
DVD Player With Component Connectors.(See page.17)
1.Using an A/V cable, connect the DVD player's Audio OUT jacks to
the TV's Audio IN jacks.
2.Using an S-Video Cable, connect the DVD player's S-Video OUT jack
to the TV's S-Video IN jack.
Rear of TV
VIDEO-1 Audio Output
VIDEO L R
S-VIDEO ANT
VIDEO-2
EarPhone
S-VIDEO VIDEO L R
Note: S-Video is strongly recommended for use if your VCR or video
equipment has the option .S-Video input has better quality of picture than a
composite Video signal.
Note: You can also use the Video 2 jacks located on the TV rear to
connect additional video equipment.
Component1
Y Pb / Cb Pr / Cr L R
Component2
L R Y Pb / Cb Pr / Cr L R
A/V cable with RCA connector
S Video cable
TV Installation and Connection Guide
DVD player
16