Skoda Amundsen Owner's Manual page 59

Route calculation
The route is calculated automatically according to the entered destination. The
calculation takes the settings of the route options
namic route, etc.) into account.
The route is recalculated each time if you ignore driving recommendations or
change the route. This process takes only a few seconds. Navigation an-
nouncements can only then be re-transmitted.
If Demo mode is switched on » page
want the guidance to start in demo mode or normal mode.
The Demo mode displays a simulated drive to the destination entered. There is
the option of travelling the calculated route "as a simulation" just on the
screen.
If an alternative route option is set, function keys are displayed, following the
calculation, for the route types with information on the route length and the
expected travelling time.
Route type
economical

fast

short

Selecting the route type will start route guidance.
If the option for alternative routes is disabled, the route is calculated and route
guidance is started according to the preferred route
It is possible to select a pre-calculated route before the calculation of the re-
maining routes is completed.
The unit tries to allow for continued guidance even if the navigation data is in-
complete or there is no data at all for the given area (e.g., one-way streets,
road types, etc.).
Interrupt and continue route guidance
If the ignition is switched off and on again and the key was left in the ignition
(in vehicles with the KESSY system, when the ignition was switched off):
›
Within 30 min - route guidance is continued taking into account the calcula-
ted route
›
Between 30 and 40 min - the screen switches to "standby" mode (energy-
saving mode of the screen); the route guidance continues using the calcula-
ted route
» page 44 (route type, dy-
45, a prompt appears asking whether you
» page 44.
›
Between 40 min and 120 min - the unit screen displays the message Contin-
ue route guidance?; after you confirm the message, the route guidance con-
tinues using the calculated route;
›
After 120 min - route guidance is cancelled.
If ignition is switched off and on again and the key removed temporarily (in
vehicles with the KESSY system, ignition switched off and the driver's door
opened):
›
Within 10 min - route guidance is continued taking into account the calcula-
ted route
›
Between 10 min and 120 min - the screen switches to "standby mode" (ener-
gy-saving mode of the screen); the unit screen displays the message Contin-
ue route guidance?; after you confirm the message, the route guidance con-
tinues using the calculated route
›
After 120 min - route guidance is cancelled.
Graphic navigation instructions
The graphical navigation instructions are displayed:
›
in the MAXI DOT display » page
›
in the split screen in the unit screen
Navigation announcements
The device makes navigation announcements. The navigation announcements
are started as soon as the route calculation is complete or a route type has
been selected.
The navigation announcements are generated by the instrument system. The
lawless clarity of the message (eg, road or city name) cannot always be guar-
anteed.
Before turning, up to 3 recommendations are issued:
The last navigation announcement can be repeated:
›
by pressing the menu knob
2
›
by pressing the dial » Fig. 9
2
wheel.
The timing of the navigation announcement is dependent on the type of road
and the driving speed. For example, on motorways the first announcement is
given about 2000 m (6000 ft) before the place where you want to exit the mo-
torway.
12.
» page 49.
» Fig. 1 on page 5;
on page 12 on the multifunction steering
Navigation

57