Skoda Amundsen Owner's Manual page 53

›
In the Navigation main menu, press  → Other POIs → Options → Address.
Some address positions are already pre-filled with the data of the last destina-
tion.
The pre-filled positions can be adjusted by touching the item and then adjust-
ing it in the input screen » page 8.
To start navigation, you need to enter country, city and street.
The information is entered step by step in individual input screens.
When entering the street, instead of a street name, it is possible to select the
centre of the entered city by touching Centre. Then it is no longer necessary to
enter the house number or junction.
Both the house number and also a further address supplement in the form of a
number can be entered. The system displays a list of destinations found from
combinations of the two numbers.
If the entered house number was not found, a menu opens to clarify the desti-
nation:
No house number - Enter an address without a house number and display a
■
menu with destination details
Nearest house number: - Confirmation of the proposed house number
■
Enter junction - Open a menu with junctions with the selected street
■
If the address is entered correctly, destination details are dis-
played » page 60 .
Map
Fig. 36 Destination entry in the map
›
In the Navigation main menu, press  → Options → On map.
or
›
In the Navigation main menu, press  → New dest./stopover → Options →
On map.
or
›
In the Navigation main menu, press  → Other POIs → Options → On map.
Entry on the map is also used for entering the search area for POIs
›
In the Navigation main menu, press  → Other POIs → Search area → Se-
lect on map → Edit.
The destination can be entered on the map by using the GPS coordinates or
the crosshairs » Fig. 36.
GPS coordinates
The destination can be entered through the degrees of latitude and longitude
(GPS coordinates).
By pressing the function button with the degree of latitude or longitude for
the location, a menu appears with the specification option. Use the function
keys with the symbol /  . Touching the screen outside of the function but-
tons calls up a basic menu for entering the location on the map.
The crosshairs move to the coordinates entered, which allows for checking of
the destination entered.
Crosshairs
The crosshairs show the position of the address which was previously entered.
The desired destination can be set by dragging your finger over the map to the
centre of the crosshairs.
The contact point is moved into the crosshairs through the finger movement
and at the same time the degrees of latitude and longitude are adjusted to the
point entered.
The symbol  displays the current map scale. This can be changed while the
entry is being made » page 47.
The bottom of the screen displays the address or the longitude and latitude of
the selected item.
Confirm destination
Confirm the destination by touching OK. Then the following items are dis-
played:
» page 53.

51
Navigation