System Adjust Menu - Oki ES1220n User Manual

Note: Factory default settings are shown in bold.
Item
X ADJUST
Y ADJUST
DUPLEX X ADJUST -2.00MILLIMETER TO
DUPLEX Y ADJUST -2.00MILLIMETER TO
PCL TRAY2 ID#
PCL MP TRAY ID#
DRUM CLEANING

System Adjust Menu

Settings
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
+2.00MILLIMETER
Default = 0.00
+2.00MILLIMETER
Default = 0.00
1 to 59
Default = 20
1 to59;
Default = 4
OFF
ON
ES 1220n Menu Functions • 210
Explanation
Adjusts overall print position
horizontally in 0.25
increments.
Adjusts overall print position
vertically in 0.25 increments.
Adjusts overall print position
of print face horizontally in
0.25 increments.
Adjusts overall print position
of print face vertically in 0.25
increments.
Appears only if the optional
Second Paper Tray (see
"Second Paper Tray" on
page 246) is installed.
Sets Tray 2 number for the
PCL emulation.
Sets MP tray number for PCL
emulation.
If you are experiencing
horizontal white lines on your
printed pages, enter the menu
and temporarily change this
setting to ON, then send a
one page print job. This will
cause an extra blank sheet to
print, cleaning the drum prior
to printing.
Careful! Leaving this set to
ON will reduce the image
drum life.