Test Mode - Sony RCD-W500C Service Manual

RCD-W500C
Setting the Test Mode
Procedure:
1. Press the POWER button to POWER on.
2. Press the l AMS L (DECK A), [SBM] and l AMS
L (DECK B) buttons in order without releasing the button.
3. Turn the l AMS L (DECK B) knob to select the menu.
4. Press the l AMS L (DECK B) knob to execute the test
mode.
Releasing the Test Mode
Procedure 1:
1. Turn the l AMS L (DECK B) knob to select the Ship
Mode.
2. Press the l AMS L (DECK B) knob to execute the Ship
Mode.
3. Press the POWER button to POWER off.
Procedure 2:
1. Press the l AMS L (DECK A), [SBM] and l AMS
L (DECK B) buttons in order without releasing the button.
2. Press the POWER button to POWER off.
Contents of test mode
No. Display
1 SYS Version
2 CDR Version
3 BU Test
4 SERVICE
5 Ship Mode
6 FL ALL ON
7 FL ALL OFF
8 FL ITIMATSU
9 LED CHECK
10 KEY CHECK
11 RM CHECK
12 CDR History
13 Play Speed
System Version Display
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "SYS Version", and press the l AMS L
(DECK B) knob.
2. The system version is displayed.
3. To exit from this mode, turn the l AMS L (DECK B)
knob to display "Ship Mode", and press the l AMS L
(DECK B) knob to execute the Ship Mode.
4. Press the POWER button to POWER off.
CDR Version Display
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "CDR Version", and press the l AMS L
(DECK B) knob.
2. The CDR version is displayed.
3. To exit from this mode, turn the l AMS L (DECK B)
knob to display "Ship Mode", and press the l AMS L
(DECK B) knob to execute the Ship Mode.
4. Press the POWER button to POWER off.
20
SECTION 4

TEST MODE

Function
System version display
CDR version display
Deck A BU test mode
Deck A Service mode
CD Shipment mode
Fluorescent indicator tube test
Fluorescent indicator tube test
Fluorescent indicator tube test
LED check
Keyboard check
Remote commander check
CDR error history display
Deck A x4 speed
BU Test Mode (Deck A)
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "BU Test", and press the l AMS L
(DECK B) knob.
2. "bdt S CURVE" is displayed. This test mode is used in the Elec-
trical Adjustment section.
3. Turn the l AMS L (DECK B) knob. "bdt RAM READ",
"bdt RAM WRITE", "bdt COMOUT", "bdt FB TUNE" and "bdt
ERR RATE" are displayed.
4. To exit from this mode, press the MENU/NO button and turn
the l AMS L (DECK B) knob to display "bdt ERR
RATE".
5. Press the l AMS L (DECK A), [SBM] and l AMS
L (DECK B) buttons in order without releasing the button.
6. Press the POWER button to POWER off.
Service Mode (Deck A)
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "SERVICE", and press the l AMS L
(DECK B) knob.
2. "SERVICE MODE" is displayed.
3. Press the ERASE button, "SLED OUT" is displayed and the
sled moves to the outermost direction.
When the ERASE button is released, "SLED STOP" is displayed
and the sled stops.
4. Press the FINALIZE button, "SLED IN" is displayed and the
sled moves to the innermost direction.
When the FINALIZE button is released, "SLED STOP" is
displayed and the sled stops.
5. To exit from this mode, press the l AMS L (DECK A),
[SBM] and l AMS L (DECK B) buttons in order with-
out releasing the button.
6. Press the POWER button to POWER off.
Note: Always move the pick-up to the most inside position when
exiting from this mode.
Ship Mode
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "Ship Mode", and press the l AMS L
(DECK B) knob.
2. "Push POWER!" is displayed.
3. Press the POWER button to POWER off.
FL ALL ON Mode
Procedure:
1. Enter the test mode, then turn the l AMS L (DECK B)
knob to display "FL ALL ON", and press the l AMS L
(DECK B) knob.
2. All segments of fluorescent indicator tube and LED turn on.
3. Press the MENU/NO button, then "FL ALL ON" is displayed
again.
4. To exit from this mode, turn the l AMS L (DECK B)
knob to display "Ship Mode", and press the l AMS L
(DECK B) knob to execute the Ship Mode.
5. Press the POWER button to POWER off.