Ppr Emulation - Oki C7100 User Manual

PPR Emulation

Item
PEN WIDTH
ADJUST
CHARACTER PITCH
FONT CONDENSE
CHARACTER SET
SYMBOL SET
LETTER 0 STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
Value
ON; OFF
10 CPI; 12 CPI; 17 CPI;
20 CPI; PROPORTIONAL
12CPI - 20CPI; 12CPI -
12CPI
Set 1; Set 2
IBM 437
Disable; Enable
Normal; Slashed
6 LPI; 8 LPI
OFF; ON
CR; CR+LF
LF; LF+CR
80 COLUMN; 136
COLUMN
11 INCH; 11.7 INCH;
12 INCH
0.0 INCH - 1.0 INCH
0.0 INCH - 1.0 INCH
Disable; Enable
Same; Diff
SETTING UP > 54
Description
IN PCL, when switched ON,
emphasises the pen width to improve
the appearance of lines specified with
minimum width.
Specifies character pitch in IBM PPR
emulation.
Specifies 12CPI pitch for Condense
Mode.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH
with letter o and 9DH with a zero
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Specifies whether or not the printer
ejects a blank sheet.
Not available on duplex operation.
Sets functionality on receipt of CR
code.
Sets functionality on receipt of LF
code.
Specifies the number of characters
per line.
Specifies the length of paper.
Specifies the distance of print from
the top edge of the paper.
Specifies the distance of print from
the left hand edge of the paper.
Sets the printing mode that can fit
print data, equivalent to 11 inches (66
lines), in the LETTER-size printable
area.
Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.