PRINTOUT IS GARBLED OR INCORRECT WITH PARALLEL
CONNECTION.
Possible cause
Possible mismatch on
parallel connection
between computer and
printer.
CANNOT PRINT.
LPT write error displayed.
PRNUSBx write error is displayed.
Possible cause
Interface is disabled.
Printer is switched OFF.
Printer interface cable is
disconnected.
A converter, buffer,
extension cable or USB
hub is being used.
Printer driver output port
is incorrect.
Printer is not selected in
the printer driver.
Incorrect printer driver is
being used.
Remedy
Change parallel transmission mode (see Parallel
Transmission Mode above).
Remedy
In the printer menu settings, enable Parallel or USB
interface.
Switch ON.
Reconnect the printer interface cable.
Test by connecting the printer and computer directly.
Set correct output port to which the printer interface cable
is connected.
Select the printer or set to default printer.
Delete this printer driver and install correct printer driver.
TROUBLESHOOTING > 187