Pcl Emulation - Oki C7100 User Manual

PCL emulation

Item
FONT SOURCE
FONT NO.
FONT PITCH
FONT HEIGHT
SYMBOL SET
A4 PRINT WIDTH
WHITE PAGE SKIP
CR FUNCTION
LF FUNCTION
PRINT MARGIN
TRUE BLACK
Value
Resident; Dimmo;
Downloaded
I000 to 1083
0.44 cpi to 99.99 cpi
(10.00 cpi)
4.00 pt to 999.75 pt
(12.00 pt)
PC-8
78 column; 80 column
OFF; ON
CR; CR+LF
LF; LF+CR
Normal; 1/5 inch; 1/6
inch
ON; OFF
SETTING UP > 53
Description
Selects location of the PCL font used.
Dimmo is displayed only when font
DIMM ROM exists in the slot.
Downloaded only appears if fonts
have been down loaded to the printer.
Sets the PCL font number.
The range of this variable changes
depending on the FONT SOURCE
setting at the time. If the default font
is set for FONT SOURCE, the number
starts at 0. If it is not, the number
starts at 1. The maximum value is
equal to the number of fonts installed
in FONT SOURCE.
Sets the font width in characters per
inch. Only displayed if the font is a
fixed spacing outline font.
Sets the font point size. Only
displayed if the font is a relative
spacing outline font.
Selects a PCL character symbol set.
Selects the number of characters in a
line before automatic return
(A4paper), PCL mode.
Selects whether or not to print pages
that contain no data (white pages),
PCL mode.
Sets functionality on receipt of CR
code in PCL mode.
Sets functionality on receipt of LF code
in PCL mode.
Sets unprintable paper area (margin).
Normal: PCL emulation compatible
1/5 inch: domestic model emulation.
1/6 inch: HIPER-W emulation.
PCL: Sets whether to use Composite
Black (CMYK mixed) or Pure Black (K
only) for the black (100%) in image
data. OFF: Mode using Composite
Black ON: Mode using Pure Black (not
valid with PostScript).