Transferring Data - Sharp ZQ-630 Operation Manual

Transferring Data

There are several ways to transfer information - whether specific
entries or entire files - between the Organizer and other
information processing devices, including personal computers
and other SHARP Organizers. In this way, you can back up
your information to guard against losing it, or copy information
so that you or someone else can work with it on another device.
A summary of transfer devices, transferable data, and tasks to
which a transfer device is most suited is provided in the table
Transferable data and Peripherals
Another ZQ-630/
ZQ-6401 ZQ-650
Organizers
(see p 74 and 77)
.
Personal
Computer
Only ZQ-650 Organizer has the function of infrared transfer.
*
Depending upon the SHARP or third-party software you
are using, some features and capabilities may vary.
74
with other ZQ-6301
Organizers
can only rece,ve
4 pin cable
data
Docking Statlo" or PC
The Auto power off function (see p.12) is disabled in all
transfer modes.
When transferring data from other models, only entries in a
mode (application) supported on the ZQ-6301 6401 650
Organizer can be sent.
Transferring between two Xl-650 Organizers
Data can be transferred directly between two ZQ-650
Organizers via the infrared port. Single entries or all the entries
in an application can be transferred in the Schedule, To Do,
Ann, Memo, Expense, Tel and User File applications.
The transfer procedure differs according to whether single
entries or complete files are to be transferred.
*
Press [ON] at any time to interrupt and cancel a transfer.
After a transfer, the display returns to the application being
used before the transfer procedure was begun.
*
No peripheral devices are required to transfer data via the
infrared port. However, infrared transfers are easily affected
by ambient conditions which may interfere with thistype
of transfer. Connecting the two units directly using the 4
pin cable will ensure a morereliable transfer. See p.76