Table of Contents
Advertisement
6.
Click [Next].
7.
[Welcome to the Add Standard TCP/IP Printer Port Wizard]
appears.
8.
Click [Next] and provide the following information. Enter
[Printer name or IP address], for example: 172.168.1.31. If
the above IP address is entered, the Port Name will default
to IP_172.168.1.31.
9.
Click [Next]. [Additional Port Information Required]
displayed.
10.
Under [Device Type], select [Custom] then [Settings].
11.
Ensure [Protocol] is set to [LPR].
12.
Ensure [Queue Name] is lp and [SNMP Status Enabled] is
deselected.
13.
Click [OK].
14.
Follow on screen instructions to finish installing the printer.
Port 9100
1.
Select [Start]→ [Settings]→ [Control Panel]→ [Printers and
Other Hardware].
2.
Select [Printers and Faxes].
3.
Click [Add Printer] and then click [Next].
4.
Select [Local printer attached to this computer], clear the
[Automatically detect and install my Plug and Play printer]
check box, and then click[Next].
5.
Select [Create a New Port] and select [Type Standard TCP/IP
Port].
6.
Click [Next].
OkiLAN 8300e Network User's Guide, C6000n and C6100 Series
Microsoft Windows - 89
Advertisement
Table of Contents
