Option Menu - Oki 8300E C6000N User Manual

Option Menu

In the [Option] menu, the following item can be selected:
Item
Use TCP/IP
Protocol
Use IPX/SPX
Protocol
Environment
Setup
OkiLAN 8300e Network User's Guide, C6000n and C6100 Series
Function
If this item is selected, AdminManager uses TCP/IP
protocol to search/configure network interface cards.
If this item is selected, AdminManager uses IPX/SPX
protocol to search/configure network interface cards.
TCP/IP Tab
bmp50.jpg
NetWare Tab
bmp51.jpg
SNMP Tab
TimeOut Tab
bmp52.jpg
Configuration - 41
Set broadcast addresses that are
used to search OKI network interface
cards using the TCP/IP protocol. If
[Use TCP/IP protocol] is unchecked,
the search will not be carried out
using TCP/IP.
Set network addresses that are used
to search OKI network interface cards
via NetWare protocol. If there any
many NetWare file servers on your
network, specify the network address
to which the network card belongs. If
[Use NetWare protocol] is unchecked,
the search will not be carried out
using NetWare, but if [Auto Search] is
selected, AdminManager will search
all networks that AdminManager can
detect.
Obtain the printer name via SNMP;
Set Community Name.
[Search Every]: Set response waiting
time from a network card in seconds.
[Time Out]: Set time out between
AdminManager and the network
interface card in seconds.
[Retry]: Set how many times the
retry will be carried out between
AdminManager and the network
interface card.