Table of Contents
Advertisement
Using SNMP
The printer and network card can be managed via a standard SNMP
management station. The network card supports SNMPv1, MIB-II
and OKI Data Private MIB.
The printer's trap address can be set in five places using TCP/IP
and in one place with IPX.
The printer's trap address can be set in five places using TCP/IP
and in one place with IPX.
Printer trap settings can be made with TELNET and a Web browser.
Configurable items and Default Values
Bold is the default setting.
Ref. No.
Admin
Manager
TCPIP-1
[OKI Device
Setup]-
[TCP/IP]-
[Use TCP/IP
Protocol]
TCPIP-2
[OKI Device
Setup]-
[TCP/IP]-
[IP Address]
TCPIP-3
[OKI Device
Setup]-
[TCP/
IP]-[Subnet
Mask]
TCPIP-4
[OKI Device
Setup]-
[TCP/
IP]-[Default
Gateway]
OkiLAN 8300e Network User's Guide, C6000n and C6100 Series
Web browser
TELNET/
Diagnostic
test print
[Network
[Setup TCP/
Configuration]-[
IP]-
General
[TCP/IP
Settings]-[Protoc
protocol]
ol Options]-[TCP/
IP]
[Network
[Setup TCP/
Configuration]-[T
IP]-[IP addres
CP/IP]-[Fixed IP
s]
Address
Settings]-[IP
Address]
[Network
[Setup TCP/
Configuration]-[T
IP]-[Subnet
CP/IP]-[Fixed IP
mask]
Address
Settings]-[Subne
t Mask]
[Network
[Setup TCP/
Configuration]-[T
IP]-[Gateway
CP/IP]-[Fixed IP
address]
Address
Settings]-[Defaul
t Gateway]
Configuration - 51
Available
Notes
options
ENABLE/
Set TCP/IP
DISABLE
protocol,
enabled/
disabled
0.0.0.0—
Set IP
255.255.255.25
address
5 (0.0.0.0)
0.0.0.0—
Set subnet
255.255.255.25
mask
5 (0.0.0.0)
0.0.0.0—
Set
255.255.255.25
gateway
5 (0.0.0.0)
(default
route).
Advertisement
Table of Contents
