Automatic Forms Tear-Off; Tear Key And Automatic Forms Tear-Off - Oki 320 User Manual

Automatic Forms Tear-Off

Forms Tear-Off must be set to ON in the menu for Automatic
Forms Tear-Off to occur.
Automatic Forms Tear-Off automatically moves the paper
from the initial printing position (print start position) to the
tear-off position, after a time interval which you select
through the menu.
The top of the page (perforation) is even with the tear bar.
The tear bar is located under the clear top of the access cover.
Paper remains in the tear-off position until the printer
receives more data. Then, the paper moves back down for
printing (retracts to the initial print position).
When printing stops, the paper advances to the tear-off
position.

TEAR Key and Automatic Forms Tear-Off

If you press TEAR (1) when Forms Tear-Off is turned on
(activated in the printer menu), the printer retracts the paper
to the Top of Form position.
SEL
SEL
MENU SHIFT
EXIT
POWER ALARM
|
48 Microline 320/321 Turbo
1
32T-FP.eps
FF/LOAD TEAR PARK QUIET
LF
Micro Feed
Micro Feed
TOF
Down Up
GROUP ITEM SET PRINT
MENU
!
The status of the Forms Tear-Off menu setting affects
how you set the Top of Form.
To determine the status of the Forms Tear-Off menu
setting, refer to "Using Your Printer, Top of Form,
Forms Tear-Off Status (ON or OFF)."
For information on setting the Top of Form, refer to
"Using Your Printer, Top of Form, Setting Top of Form,
Forms Tear-Off (ON or OFF)."
!
If the software package you are using "pauses" while
sending data to the printer, Forms Tear Off may be
activated (if it is enabled through the Menu). The pause
must be for two or more seconds. No data is lost. Uneven
print registration will occur due to the paper movement.
If the problem occurs, use the menu to turn off this
feature.
!
DO NOT use Forms Tear Off with labels or multi-part
forms!
!
Forms Tear-Off CANNOT be used when the optional
pull tractor is engaged.