Fujitsu PRIMERGY RX2510 M2 Operating Manual page 52

Starting up and operation
Pos. Symbol Indicator
AC
8 - connected
indicator
iRMC-related status signals
ID indicator
blue flashing
blue flashing
I
For further information, please refer to chapter "Updating or recovering
the iRMC" in the Upgrade and Maintenance Manual.
52
Status
green on
off
Global error
indicator
off
orange flashing
Operating Manual
Description
is on in the following cases:
– the system is in power-off mode
but connected to the mains (AC
connected)
– the system has been switched
on and is in power-on delay
I
After connecting the server
to the mains it takes about
60 seconds until the server
enters the standby mode.
is off in the following cases:
– the system is not connected to
the mains
– the system is powered on and in
normal operation (S0)
Description
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
An emergency flash of the iRMC
firmware is in progress.
RX2510 M2