Installation Steps, Overview - Fujitsu PRIMERGY RX2510 M2 Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, carefully read the safety instructions in
page 29.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that you have all necessary manuals (see
overview" on page
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê Mount the server into the rack (see
the rack" on page
Ê Wire the server. Follow the instructions in sections
the server" on page 44
page 47.
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
RX2510 M2
"Unpacking the server" on page
10); print out the PDF files if required.
43).
and "Notes on connecting/disconnecting cables" on
46).
"Control elements and indicators" on page
Operating Manual
"Important information" on
"Installing/removing the server in/from
"Connecting devices to
"Connecting the server to the
42).
"Documentation
49).
27