Connecting Devices To The Server - Fujitsu PRIMERGY RX2510 M2 Operating Manual

Hardware installation
The main features of Fujitsu rack systems are as follows:
– rail systems that can be mounted without tools
– support systems having a linear alignment feature to ensure that they can
be adjusted to different rack depths
Asymmetrical PRIMECENTER Rack and DataCenter Rack provide an
enhanced cable management in the lateral rack area.
3rd party racks
I
Installation in most current rack systems from other manufacturers
(3rd party racks) is also supported. For details please contact your sales
representative.
5.3

Connecting devices to the server

The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed.
I
Some of the devices that can be connected may require special
software, e.g. drivers (see the documentation for the connected device).
Figure 2: Ports on the front
The following connectors are located on the front of the server:
1 2 x USB 3.0 connectors
44 Operating Manual
RX2510 M2