User's Guide; Installation For Windows 2000 - Oki Pacemark PM4410 Setup Manual

On-Line User's Guide
The Pacemark 4410 CD also includes the OKI Pacemark 4410 On-Line
User's Guide, as well as the Adobe Acrobat Reader software required to
view the User's Guide.
When installed, the User's Guide takes up approximately 73 MB of
space on your hard drive. If you prefer, you can view the User's Guide
directly from the CD (\Manuals\English\e4410m.pdf).
Printing the OKI Pacemark 4410 On-Line User's Guide
With the User's Guide open in Acrobat Reader:
1. Select File, Print.
2. Choose the page(s) to print.
3. For Acrobat Reader 3:
a. Make sure Level 2 Only is selected under PostScript Options.
b. Click Setup and confirm the printer and its settings, then click OK.
For Acrobat Reader 4:
a. Make sure PostScript Level 2 is selected as the Print Method
under PostScript Options.
b. Click Properties and confirm the printer and its settings, then click
OK.
4. Click OK to print.

Installation for Windows 2000

To Install the Pacemark 4410 Printer Driver
(English Only) on Windows 2000
Minimum System Requirements for Windows 2000:
CPU: pentium, 133 MHz (350 MHz or higher recommended)
RAM: 64 MB
Empty hard disk space:
2 MB for use by print spooler
73 MB for User's Guide (optional)
10 MB for Adobe Acrobat Reader Software (optional)
E-36 Pacemark 4410 Setup Guide