Installing The Remote Panel Antenna - Motorola AP 7181 Installation Manual

Installation Guide
5. Using the four screws provided, attach a blank antenna panel to the unit to cover the side of the Access
Point where the functional antenna panel was removed. Adjust the panel to the desired position. Tighten
the screws to 60 inch pounds (lbf-in).
6. Return the unit to the shipping carton for transportation to the installation site.
7. Collect the radome panel removed from the unit, all other hardware, and tools required for the installation.

2.14.2 Installing the Remote Panel Antenna

To complete the installation of the remote panel antenna at the site:
1. At the installation site, install the AP 7181 using the appropriate
WARNING!
2. Assemble the ADEPT panel remote mounting bracket using the instruction sheet supplied with the
hardware.
3. Test fit the mounting bracket at the installation site, positioning the bracket so that when the remote panel
antenna is attached, it will be oriented to support LOS communication with other devices.
4. Tighten the nuts on the mounting bracket so that the support arm remains in the desired position.
5. Use a cordless drill and a 3.6 mm bit, drill a hole for the set screw on the mounting bracket.
6. Insert and tighten the M4.8 set screw for the mounting bracket.
DO NOT apply power to the unit until the remote panel installation procedure is
complete.
Field Installation
procedure.
45