16
• Adjustable wrench
• Standard level
• Anti-seize lubricant
You may also need a Phillips screw driver and a 2.5 mm allen wrench.
2.10.1 AP 7181 Connections and Ports
The power cable, grounding connections, power indicator light, Ethernet ports, and LED status panel on the bottom
the AP 7181 are shown in the figure below:
NOTE
The grounding cable for an AP 7181 must be a #8 gauge (10 mm) wire cross section
and use a ring lug that will fit the M5 grounding screw on the bottom of the unit.
AP 7181 Access Point