Display Brightness; Vg-2 Alert Settings - Cobra RAD350 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty

Display Brightness

Assistance
You can choose from three settings for
Brightness of the display. Repeatedly push
the Dim button to cycle through the settings.
The factory setting is Bright.
Secondary Icons
Notice
8 English
Bright
Press and
release
Dim Button
Dim
Dark
Dim Button
Settings
Your Detector
Intro Operation Customer Warranty

VG-2 Alert Settings

Assistance
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from VG-2 RDDs and can provide alerts
when any of these or similar devices are in use near your vehicle.
Secondary Icons
Your detector is invisible to VG-2 RDDs. You can choose whether you want to
be alerted to VG-2 RDD signals. The factory setting for VG-2 alert is Off.
Notice
To Turn VG-2 Alerts On and Off
Audible Tone
While no signal
is being detected,
On = One beep
press and hold the
Dim button for
four seconds.
Off = Two beeps
Dim Button
Press and hold
for four seconds
Visual Display
V LED Flashes Once
V LED Flashes Twice
Nothing Comes Close to a Cobra 9
®