GRAN BARISTO
7.10. Pump
Slip off the pump
off the support.
7.11. Flow-meter
Lift the fl ow meter out of the casing assembly and remove the electrical and water circuit
connections.
7.12. Gearmotor and microswitch present brew unit.
Loosen the screws, unlock the pin and remove the system of levers.
Downloaded from
www.Manualslib.com
Disconnect the electrical / idraulics connections.
manuals search engine
Remove the pump
extension.
In the reassembling make sure the spring is
repositioned correctly (see photo).
07 DISASSEMBLY
Page
06
/ 09