NEO 1.2 Firebrick Installation Instructions
This package contains 6 full-size firebricks as well as 6 various cut-size bricks.
With the heater in the upright position, install firebricks as follows:
•
Place 4 full-size firebricks "C" at the back of the heater first.
•
Next, install the side firebricks, 1 full-size brick "C" and 1 brick "B" on each side above brick "C" sliding it
back behind the rear brick retainer.
•
Lastly, install "A" and "D" firebricks as shown in the bottom of the firebox.
Figure 12: NEO 1.2 Firebricks.
A
B
C
D
120416-24_ NEO 1.2
B
D
A
D
ITEM
Complete Brick Set .......................................................... NE12.BRIC-A
4 1/2" X 5 1/2" X 1 1/4" ............................(39 mm x 115 mm x 32 mm)
3" X 4 1/2" X 1 1/4" ...................................(77 mm x 115 mm x 32 mm)
9" X 4 1/2" X 1 1/4" .................................(230 mm x 115 mm x 32 mm)
4 1/2" X 5 1/2" X 1 1/4" (Clipped) .............(39 mm x 115 mm x 32 mm)
C
Part Number
21
Installation Instructions
B
5055.600EU-A