Led Indication - KTI Networks KGS-0820 User Manual

2.10 LED Indication

LED Function
Power Power status
M Management status
1000M Port link status
10/100M Port link status
PoE Port PoE status
F7 F7 status
F8 F8 status
2.11 Making Console Connection
Console port is a 9-pin male D-sub connector. It serves as an RS-232 DTE port.
Pin Definitions
Pin 2 RXD
Pin 3 TXD
Pin 5 GND
Pin 1,4,6-9 NC
Baud Rate Information
Baud rate: 115200
Data bits: 8
Parity: none
Stop bit: 1
Flow control: disabled
State Interpretation
ON The power is supplied to the switch.
OFF The power is not supplied to the switch.
OFF The switch is in initialization and diagnostics.
BLINK The switch is initialized completely with diagnostic error.
ON The switch is initialized completely and normal.
ON A 1000Mbps link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF Port link is down.
ON A 10Mbps or 100Mbps link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF Port link is down.
ON PoE power is delivered on the port.
OFF No PoE power is delivered.
OFF RJ-45 copper connection is selected on Port 7.
ON SFP fiber connection is selected on Port 8.
OFF RJ-45 copper connection is selected on Port 8.
ON SFP fiber connection is selected on Port 8.
-21-