Table of Contents
Advertisement
User Manual
9.
Click Save/Apply
Note: Remaining numbers of entries that can be configured is up to 32.
To Remove:
1.
Select the Server Name by clicking on Remove check box
2.
Click Remove button.
Aztech DSL7000GRV(S)
1. Open your browser.
2. Type-in 192.168.1.254 on the address bar and then press Enter.
3. Go to Firewall Configuration, click Port Forwarding
4. Select Server Name if application is available in one of the option and
fields will auto-populate or select Custom Server if you enter the name
manually
5. Enter the Server IP address of the computer on your local network that
you want to allow the incoming service
6. For External Port Start and External Port End, enter the port or ports that
you want to open. If you want to open one port, enter the same port in
both boxes
7. For Protocol, select TCP.
8. For Internal Port Start and Internal Port End, enter the port of ports that you
want to open. If you want to open one port, enter the same port in both
boxes
9. Click Save/Apply
Note: Remaining numbers of entries that can be configured is up to 32.
36
Hide quick links:
Advertisement
Table of Contents
