Power On Your Phone; Installing/Removing, Charging The Battery; Power Off Your Phone - Alcatel ONE TOUCH A392CC Manual

Installing or removing the battery
insert and click the battery into place, then close the telephone cover.
unclip the cover, then remove the battery.
Charging the battery
Connect the battery charger to your phone and outlet respectively.
• LED light will be on when it is charging, and be off when battery is fully
charged.
• Charging may take about 20 minutes to start if the battery is low.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the charger.
• The outlet must be near the phone and easily accessible (avoid electric
extension cables).
15
• When using your telephone for the first time, charge the battery fully
(approximately 3 hours). You are advised to fully charge the battery
( ).
To reduce power consumption and energy waste, when the
battery is fully charged, disconnect your charger from the plug;
switch off Bluetooth and background-running applications when
not in use; reduce the backlight time, etc.
1.2

Power on your phone

Hold down the key until the telephone powers on, type in your PiN
code if necessary and then confirm with the
displayed.
if you do not know your PiN code or if you have forgotten it, contact your
service provider. Do not leave your PiN code with your telephone. Store
this information in a safe place when not in use.
if Broadcast SMS are displayed, use the
press the to return to the Home Screen.
While the phone is searching for a network, "searching/Emergency"
will be displayed.
1.3

Power off your phone

Hold down the key from the Home Screen.
key. The Home Screen is
key to browse through them or
16