Bose 3-2-1 GS SERIES II Owner's Manual page 37

AUX AUX
AUX AUX
AUX AUX
Downloaded From TheatreSystem-Manual.com Manuals
To set up the remote to control your cable/satellite box
1. Turn on both the 3•2•1 system and your cable/satellite box.
2. Press and hold CBL-SAT until the remote LED is lit (about five seconds).
3. Alternately press Channel
turns off.
4. Press Enter. Check that the remote LED turns off.
5. Point the remote at your cable/satellite box and press CBL-SAT On-Off. If your cable/
satellite box does not respond, go back to step 2 and try again.
To set up the remote to control your VCR or PVR (for example, TiVo or Replay TV)
1. Turn on both the 3•2•1 system and your VCR/PVR.
2. Press and hold AUX until the remote LED is lit (about five seconds).
3. Alternately press Channel
4. Press Enter. Check that the remote LED turns off.
5. Point the remote at your VCR/PVR and press AUX On-Off. If your VCR/PVR does not
respond, go back to step 2 and try again.
Controlling Other Audio Devices
and CBL-SAT On-Off until your cable/satellite box
and AUX On-Off until your VCR/PVR turns off.
37