Installing the remote control batteries
Figure 19
Installing the batteries
Downloaded From TheatreSystem-Manual.com Manuals
1. On the back of the remote, slide open the battery compartment (Figure 19).
2. Insert the two supplied AA (IEC-R6) 1.5V batteries, or their equivalent, as shown. Match
the plus (+) and minus (–) marked on the batteries with the plus (+) and minus (–) inside
the battery compartment.
3. Slide the battery compartment cover back into place.
Note: Replace the batteries when the remote control stops operating or its range seems reduced.
(2) AA batteries (IEC R6)
Battery
compartment
door
+
+
System Setup
23