Mounting Your Cd Player; Check To Be Sure - Numark CDN-20S Operating Manual

CONNECTIONS
Typical connection with a mixer is illustrated right.
1. Connect the output connection cords from the CD Player to the
line inputs of your mixer.
2. Connect the remote control connection cable from the Unit A
connector on the main unit to the Unit A connector on the
remote control unit. Repeat for Unit B.
3. The output connection cords and the remote control
connection cables are supplied with the main unit. Be sure to
use the remote control connection cables, which have been
supplied. Use of another cable type might cause damage.
4. For fader start connect fader start cables
mixer, as in the top drawing.

MOUNTING YOUR CD PLAYER

1. Mount the units in your console or rack with 19" EIA rails
2. The transport should be mounted not to exceed an angle of 15 degrees.
3. Your CD player can be affected by excess vibration so mount the units in a
secure environment if possible.
©2000 Numark Industries

CHECK TO BE SURE

THE FOLLOWING ITEMS ARE IN THIS BOX:
1) DUAL-TRANSPORT PLAYER UNIT
1) REMOTE CONTROL UNIT
1) OWNERS MANUAL (THIS BOOKLET)
2) RCA CONNECTING CABLES
2) CONTROL CABLES
- The Leader in DJ Technology
to both side of your CD player to a similarly equipped DJ
- 5 -
CDN-20S
http://www.numark.com