Adjusting The White Balance Manually - Pentax K-70 Operating Manual

Adjusting the White Balance Manually

You can measure the white balance at a selected location.
1
Select o in Step 2 of "Setting the White
Balance" (p.72).
2
Use R to select 1 to 3.
3
1 to 3 are the locations where you
can store three different manual
white balance settings.
3
Under the light you wish to measure the white
balance of, select a white area as the subject,
and press 0 fully.
The captured image is displayed.
4
Use ABCD to specify
the measuring area.
Press M to return the measuring
area to the center.
5
Press E.
The White Balance setting screen reappears.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press E to remeasure
the white balance.
74
t Memo
• You can copy the white balance settings of a captured image
and save them as o1 to o3 in [Save as Manual WB] of the
playback mode palette. (p.83)
Manual White Balance Manual White Balance
WB± WB±
Adjust Adjust
Cancel Cancel Check Check OK OK
Cancel Cancel OK OK