Table of Contents
Advertisement
Removal steps of the Wireless-LAN/Bluetooth card
Step
Screw (quantity)
2
M2 × 3 mm, flat-head, nylon-coated (1)
When installing:
Plug the gray cable into the connector labeled MAIN or 1 on the card, and plug the black cable into the
connector labeled AUX or 2 on the card.
1080 Wireless-WAN card or M.2 solid-state drive
Note: Before you start the servicing, disable the internal battery pack. See "Disabling the internal battery
pack" on page 62.
For access, remove these FRUs in order:
•
"1010 SIM card and SIM-card tray" on page 62
•
"1020 External battery pack" on page 62
•
"1040 Base cover assembly" on page 66
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
71
Advertisement
Table of Contents
