Set The Subnet Mask - Roland Soljet EJ-640 Setup Manual

5. Network Settings

2.

Set the subnet mask.







Repeat


Press
If you are using the computer and the machine on a one-to-one basis, this completes the settings to
make on the machine. Proceed to Step 3.
If you need to set the gateway address, proceed to the following procedure.
36
When you have finished making the setting, press
Press
The screen shown in the figure appears again.
Press
Press
Press
[SUBNET MASK]: 255.255.255.000
For the subnet mask, make the setting the same value as the one
used by the computer. Here, "255.255.255.000" is entered by way of
example.
Press

and to set the subnet mask.
When you have finished making the setting, press
Press
to go back to the original screen.
.
.
.
twice.
to select the address number.
.
.
.