Roland Soljet EJ-640 Setup Manual page 19

z
Attach the media holder adjuster to the right arm as seen from the rear of the machine.
Pass the protrusions of the media holder adjuster (
temporarily tighten the bolts so that the media holder adjuster does not fall off.

Attach the adjustment bolt (
|
Tighten the bolt until the bottom of the arm and the bottom of the media holder adjuster
are aligned (
Adjustment bolt
Align the bottom of the
media holder adjuster
and the bottom of the
arm.
).
).
Media holder
adjuster
Arm
4. Assembly and Ink Filling
) through the notches on the arm
( ).
and then
17