Finishing; Door Installation & Removal - Napoleon BGD36CFNTR Installation And Operating Instructions Manual

40
Combustible mantel clearance can vary according to the mantel depth.
EN
Use the graph to help evaluate the clearance needed.

7.0 FINISHING

7.1 DOOR INSTALLATION & REMOVAL
THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DO
FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
To access the door latches, remove the valve control door and upper trim. To
open the door, release the top and bottom door latches, located at the right side
of the door.
NOTE: The protective wrap on plated parts is best removed when the as-
sembly is at room temperature but this can be improved if the assembly is
warmed, using a hair dryer or similar heat source.
W415-1132 / C / 08.20.13
( " )
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
( " )
WARNING
!
8" 203mm MANTEL
6" 152mm
4" 102mm
18"
2" 51mm
457mm
16"
406mm
14"
356mm
12"
305mm
TOP OF
OPENING
75.1