Rimage everest User Manual page 32

Rimage Everest Printer
3. Clean the platen roller.
a. Apply isopropyl alcohol to the
sponge swab.
b. Use the sponge swab to wipe the
platen roller, allowing it to rotate a
full turn before moving to the next
area.
Caution: Do not apply pressure
when cleaning the platen roller with
the sponge swabs. Applying
pressure may damage the platen
roller, leaving scratch marks on the printed disc.
4. Press the operator button to exit diagnostics mode.
5. Power off the printer.
6. Prepare the printer for use.
a. Install the print ribbon carrier.
b. Install the retransfer ribbon
carrier.
c. Close all latches.
d. Close the side cover.
e. Turn the mode switch to the
correct operating position.
f. Power on the printer. The printer is ready.
26
Platen Roller
Retransfer Ribbon Carrier
Model
Standalone Everest
Amigo II, Protégé II, Autostar II,
DL5200, and DLN5200
AutoPrinter
Switch Position
0
1
2
110632_H