Assembly Instructions
III.) Handle Assembly
1.) Attach handle to base with two carriage bolts and t-handle knobs.
2.) Spin a flange nut backwards onto the gun hook. (see hook detail)
3.) Mount the hose hook onto the handle and gun hook onto base as shown.
4.) Insert grommets into the holes on the handle nameplate.
5.) Press nozzles into grommets according to the colors indicated on the handle decal.
Handle
Nozzles
(Quantities vary
by model)
Grommets
Hose hook
(Position A)
Nylock nut
T-handle knob
Hose hook
Carriage bolts
(Position B)
GC models only
Gun Hook Detail
Flange nut
Flange nut
Gun Hook
9