Table of Contents
Advertisement
Operating on Battery Power
Operating on Battery Power
q
q
q
Note: If the computer beeps but does not enter
hibernation mode after pressing the sleep hot key,
it means the operating system will not allow the
computer to enter the power saving mode.
To exit hibernation mode, press the power switch
. The computer also resumes from hibernation
mode if the resume timer is set and matched.
Warning: Do not change any devices (such as
! !
add memory or swap hard disks) when the
computer is in hibernation mode.
Important: If the computer detects a PC I/O card
! !
installed in the PC card slots, it will not enter
hibernation mode. Instead it will enter light green
mode. Light green mode is similar to standby
mode. It consumes very low power while
2-14
If the waiting time determined by the
computer's HPM unit elapses without any
system activity, the computer goes into
hibernation mode.
If a battery low condition takes place, the
computer enters hibernation mode in about
two minutes. The Sleep Upon Battery-low
parameter in Setup must be set to
Invoked by the operating system power saving
modes
.
[ENABLED]
Advertisement
Table of Contents
