Table of Contents
Advertisement
System Utilities
System Utilities
5.3.3 Onboard Devices Configuration
5.3.3
Onboard Devices Configuration
The Onboard Devices Configuration screen
contains parameter items that are related to port
devices on your computer.
Serial Port ------------------------- [Enabled]
Base Address ------------------ [3F8h]
IRQ ------------------------------- [4]
Parallel Port --------------------- [Enabled]
Base Address ------------------ [378h]
IRQ ------------------------------- [7]
Operation Mode -------------- [Bi-directional]
ECP DMA Channel ----------- [-]
Press
and
parameter. To exit this screen and return to the
main screen, press Esc.
The following table describes the parameters in
this screen. Settings in boldface are the default
and suggested parameter settings.
5-18
Onboard Devices Configuration
=Move Highlight Bar,
and
to move the highlight bar; press
to change the setting of the highlighted
=Change Setting, Esc=Exit
Advertisement
Table of Contents
