Table of Contents
Advertisement
LIP-6830
2) Press a Line button with a solid or flashing red LED, the display indicates the number of
messages waiting for that Line.
3) Press the [DIAL] Softkey and follow the voice instructions.
NOTE: To access your voice mailbox, the VMS address must be configured in the LIP Phone
(refer to the Installer Guide for the steps to configure the VMS address).
2.16
Shared Call Appearance / Bridge Line Appearance
The LIP-6830 can support up to 24 Lines, each associated with its own button. A Line button
could be set up as a Private Line, a Shared Line or DSS/BLF Call Coverage Line. A Private
Line is used by only one phone. A Shared Line is shared by more than one phone. To learn
more about this, please refer to the VoIP configuration section within the Installer Guide.
A Shared Line appears and is accessible by an authorized set of Phones. A Shared Line allows
you to place a call on hold at one phone and easily pick it up at another. Any phone with the
Shared Line can originate and terminate calls on the Line. When a phone places an outgoing
call, all phones with the Shared Line are notified and reflect the current status of the Line.
When an incoming call is routed to a Shared Line, all phones with the Line will ring and display
the name or number of the calling party. Once the call is answered, all other phones stop
ringing and the Line button reflects a busy status.
The LED of the Line button shows the state of each call appearance on a Line.
Solid green
Fast blinking green
Slow blinking green
Solid red
Fast blinking red
Slow blinking red
To place or receive a call on a Shared Line, use the procedures previously described.
To retrieve a call held at a remote phone:
1) Press the slowly blinking Shared Line button, a list of available calls will display.
2) Use the
[Prev]-[Next]
Softkey.
[ OK ]
NOTE: The Shared Line may also be called a Bridge Line Appearance.
2.17
DSS/BLF Coverage buttons
The LIP-6830 has been designed to meet the special needs associated with an Attendant or
Secretarial answering position. Specific needs for these users who provide call coverage
include:
Local call activity for Private or Shared Line.
Call appearance ringing for Private Line.
Local call hold.
Remote call activity for Shared Line.
Call appearance ringing for Shared Line.
Remote call hold
Softkeys to select the desired call, "Retrieve Call Idx. #", and press
10
User Guide
June 07
Advertisement
Table of Contents
