Initializing The Tpm For Bitlocker Users - Dell PowerEdge R630 Owner's Manual

Steps
1. Locate the Trusted Platform Module (TPM) connector on the system board.
NOTE: To locate the TPM connector on the system board, see the System board connectors
section.
2. Align the edge connectors on the TPM with the slot on the TPM connector.
3. Insert the TPM into the TPM connector such that the plastic bolt aligns with the slot on the system
board.
4. Press the plastic bolt until the bolt snaps into place.
Figure 99. Installing the TPM
1. TPM
3. slot on the TPM connector
5. slot on the system board
Next steps
1. Install the system board.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
System board jumpers and connectors
Before working inside your system
Installing the system board

Initializing the TPM for BitLocker users

Initialize the TPM.
For more information about initializing the TPM, see
cc753140.aspx.
2. TPM connector
4. plastic bolt
http://technet.microsoft.com/en-us/library/
181